RF Connectors Explained: The Different Types & How To Choose The Right One For You

RF Connectors Explained: The Different Types & How To Choose The Right One For You

A communication system stays connected through the use of coaxial cable, ensuring RF signals have a safe path to travel through and signal integrity is maintained. Using multiple cables calls for the use of RF connectors – defined as specialised electrical connectors designed to work at radio and microwave frequencies while maintaining the shielding of coaxial cables.

Connectors help to minimise signal reflection, power loss, and electromagnetic interference in order to optimise your communication system’s performance. Due to the diversity of applications and cable/component types, there are several different connector types. Each type comes with it’s own characteristics and applications it is suited to.

Where are RF connectors used?

As mentioned, RF connectors are commonly used to connect coaxial cable together, or to connect cable to a component in the system. Cabling may need to be connected to components like radio transmitters and receivers, filters, combiners, splitters, attenuators, and the antenna itself. Connectors may also be used to join sections of coaxial cable using suitable adaptors or couplers, or provide detachable connections for testing/maintenance.

Lets use an example to greater understand the role of connectors: An outdoor antenna receives a radio signal and transfers it through a coaxial cable towards a receiver. The specific role of connectors in this case is to be present on the antenna and equipment ends of the cable, helping to establish the electrical connection. All systems are different, however, and choosing the correct type of RF connector is essential.

Types of RF connectors

Here are the five most common types of RF connectors. Each type is defined and provides you with its most common uses in applications:

• UHF Connectors: An ultra-high frequency connector is a widely recognised connector that comes with a screw-on coupling. Unlike others, UHF connectors do not have a constant 50-ohm impedance. The internal pin flare in these components causes impedance drop to around 30-40 ohms. They are most commonly used in Amateur Radio, CB Radio & Legacy RF & antenna installations.

• BNC Connectors: A Bayonet Neill-Concelman connector is a miniature quick connect/disconnect connector. It uses a twist-lock bayonet mechanism for quick and secure mating, without the need for threading. With both 50 & 75 ohm versions available, they are most commonly used in test equipment and video systems (broadcasting, CCTV etc).

• TNC Connectors: A Threaded Neill-Concelman connector is a threaded, weather and vibration resistant version of BNC connectors. They adopt screw-on threaded coupling rather than bayonet twist-lock, offering higher stability and preventing accidental disconnection. They are most commonly used in wireless communications, antenna systems & navigation equipment.

• SMA Connectors: A SubMiniature Version A connector is a semi-precision threaded RF connector that uses small, threaded connectors that are most effective in applications requiring compact RF connections. They are commonly used in microwave telecommunications, compact antennas & several wireless communications.

• FME Connectors: For Mobile Equipment connectors are miniature, 50-ohm coaxial connectors. They are compact and threaded, allowing cables to be easily snaked through tight spaces, door frames, or vehicle bodies. Therefore, they are commonly used in vehicles for mobile antenna installations, GPS receivers & cellular signal boosters.

Understanding their differences

There are a few key differences to consider before selecting an RF connector. These include…

Connection Mechanism

• Threaded connectors are secured by screwing the coupling mechanism into place

• Bayonet connectors, on the other hand, use a quick locking mechanism that makes connection and disconnection easier.

• The correct choice depends on your installation environment and how frequently connectors need to be accessed

Size & Design

• Smaller connectors are useful when space is limited

• Larger connectors could be better suited to particular cable sizes or equipment requirements

• Connector dimensions can influence which type is appropriate for an application

Electrical Characteristics: Not all connectors have the same electrical properties. They will differ in impedance, frequency rating & power handling capabilities, depending on the type or individual model.

How to Choose the Right One For You

Now you know the different types of RF connectors and their key differences, how do you select the right one for your application? Here are some key factors to consider:

• Operating frequency: A connector will be designed to operate within a specific frequency range. This means you must check a connector’s frequency rating is suitable to your application before going any further.

• Impedance: Connectors will most likely have impedances of 50Ω or 75Ω. Both are unique and are suited to different systems, meaning connectors should be selected to match the impedance requirements of cables and equipment. Using mismatched impedance components causes signal reflection and reduced overall system performance.

• Power handling: Power levels can vary from application to application and are usually determined by frequency, temperature, connector design etc. You should therefore check a connector’s rated power handling to ensure it is appropriate for the system.

• Cable compatibility: Cables will vary in diameter and overall construction, meaning only certain connectors will be compatible with that cable. This is especially important to consider as you won’t get any use out of a connector if it doesn’t even fit onto the cable.

• Connector gender & configuration: Connectors are usually specified to be male or female, depending on its configuration. You therefore need to ensure the connector interfaces match the equipment/cable they are connecting to.

• Environment: Especially for outdoor installations, you must consider the surrounding environment. Considering things like exposure to rain/moisture, temperature jumps/dips, corrosion, or mechanic stress/vibration will go a long way in ensuring the longevity of your connectors and overall system.

Common Mistakes to Avoid

Based on the factors you should consider when selecting an RF connector, here are some common mistakes you should avoid in order to optimise a system’s performance:

• Choosing a connectors based on appearance alone

• Ignoring impedance – check whether your system requires 50Ω or 75Ω components

• Overlooking cable compatibility – a connector must be designed for your specific cable

• Using unsuited connectors outdoors – leads to moisture in a connector, which can cause corrosion, degradation, or potential system failure

• Overlooking frequency & power handling – check these against your system requirements

In summary, RF connectors act as the 'glue' between cables & different components, therefore being pivotal to get right when developing your application. Whilst they boost overall system performance, their specific role includes creating a safe path through which the signals can travel without encountering interference.

17/11/2026

+44 (0)1227 743099

sales@antennapro.co.uk

Privacy Statement

© copyright 2026 antennaPRO
Unit 5B, Altira Park, Herne Bay, Kent. CT6 6GZ
Registered in the UK No: 5653102